Slump and workability
Slump is a simple test of how stiff or fluid fresh concrete is. Workability describes how easily it can be mixed, placed and finished. Superplasticizers such as SNF / PNS raise workability without adding water.
Water-cement ratio
The weight of water divided by the weight of cement. Lower ratios generally give stronger, less permeable concrete. See water-cement ratio and superplasticizers.
Water reducer and superplasticizer
A water reducer lets you use less water for the same workability. A superplasticizer (high-range water reducer) does so strongly. Examples: lignosulphonate for normal range, PCE for high range.
Retarder
An admixture that slows setting, such as sodium gluconate.
Integral waterproofing
An admixture mixed into the concrete to reduce permeability, such as TAC 07.
Waterstop
A strip or profile that seals a construction joint against water, for example a hydrophilic waterstop.
SBR latex
A polymer emulsion added to cement mortar to improve bond and flexibility: TAC Latex SBR 4.
Syntan
A synthetic tanning substance used in leather processing: SNF Dyepro.
Slump loss
The drop in slump between batching and placing, usually faster in hot weather. See how to prevent slump loss.
Initial and final set
Initial set is when concrete starts to stiffen; final set is when it has hardened enough to carry load. Retarders delay both.
Cementitious material
Cement plus any supplementary materials counted as binder in a mix. Some dosages are given per 100 kg of cementitious material, for example for Tac 501 HR.
Dosage
The amount of admixture added, expressed as a percentage of cement weight or as volume per 100 kg of cement. Always confirm with trial mixes: how to run one.
Dispersant
A material that keeps particles apart so they do not clump, such as sodium lignosulphonate.
Admixture vs additive
In concrete, an admixture is added in small amounts at mixing to change properties; see admixture types and uses.