How to install a hydrophilic waterstop in a construction joint

Published 2026-11-18 · SHAH Trading, Karachi

Where it goes

A hydrophilic waterstop is fixed along a construction joint, such as the joint between a basement slab and wall or between two pours of a water tank wall. It swells when wet and presses against the concrete to seal the joint.

Prepare the surface

Clean the joint face of laitance, dust and loose material. The surface should be sound, reasonably flat and free of standing water or oil so the strip can bond.

Fix the strip

Place the strip continuously along the joint, centred in the wall thickness and fixed as the manufacturer directs, with adhesive or mechanical fixings. Butt the ends tightly and overlap or join them as per the data sheet.

Concrete cover

Keep adequate concrete cover on both sides of the strip so it can swell against solid concrete. Compact the next pour well around it so there are no voids.

Protect from early wetting

Do not leave the strip exposed to rain or water for long before concreting, because early swelling reduces its sealing effect. Cover it if the pour is delayed.

Waterstop plus admixture

Waterstops treat the joint; waterproofing admixtures reduce permeability of the concrete itself. Many below-ground structures use both. See Swell Bar waterstop and TAC 07, and the comparison in hydrophilic vs PVC waterstop.

Frequently asked questions

Do I still need a waterproofing admixture?

A waterstop seals joints only. An admixture reduces permeability through the concrete, so they do different jobs.

Can I fix it to wet concrete?

Adhesion is poor on wet or dusty surfaces. Prepare and dry the joint face as the data sheet advises.

Products mentioned

Swell Bar Hydrophilic Waterstop TAC 07 Waterproofing Admixture

Request a quotation

More: all guides · industrial chemicals supplier in Pakistan

Related guides