Waterproofing is a system, not one product
Water finds the weakest point: a joint, a crack, porous concrete or a poorly sealed pipe penetration. Good waterproofing combines suitable concrete, joint treatment and, where needed, a surface system.
Integral waterproofing admixtures
These are added to the concrete or mortar mix to reduce permeability. TAC 07 and Tac 501 are examples we supply. They suit basements, tanks and structural concrete when used with good compaction and curing.
Joint treatment
Construction joints are a common leak path. A hydrophilic waterstop such as Swell Bar swells on contact with water to seal the joint. See hydrophilic vs PVC waterstop.
SBR latex mortars
TAC Latex SBR 4 is mixed into cement mortar for plaster, screeds and repairs to improve adhesion and reduce water absorption.
Integral admixture or coating?
Admixtures work throughout the concrete and cannot be scratched off, while coatings can be applied to existing structures. Many projects use both. Our guide on integral waterproofing vs coating for water tanks explains the trade-offs.
Good practice
Compact and cure the concrete properly, treat all joints, test tanks by filling before finishes, and follow the manufacturer's data sheet for dose and mixing.