What a ready-mix plant needs from an admixture
Ready-mix concrete is batched, transported and placed over a period of time, often in hot weather and in traffic. The admixture has to give consistent workability at the plant and still be workable on site, batch after batch.
Superplasticizers
Superplasticizers cut the water needed for a given workability or raise workability at the same water content. SNF / PNS products are widely used and cost effective; PCE products are often chosen where higher water reduction or longer workability retention is needed. Our guide SNF vs PCE superplasticizer sets out the differences.
Retarders for transport time
Long haul times and high temperatures shorten the working window. Retarders such as sodium gluconate or sodium lignosulphonate extend setting time. Over-dosing a retarder can delay strength gain, so dose carefully and trial it.
Run trials with your own materials
Admixtures interact with your cement, aggregates and water. Trial mixes with your actual materials, at realistic temperatures, are the only reliable way to set a dose. See how to run a superplasticizer trial mix.
Consistency and supply
Ask for the technical data sheet, packaging options and delivery lead time before choosing a supplier, and keep batch records. A product that performs well but cannot be supplied reliably creates problems on the plant floor.
Next step
Send us your cement type, target slump and haul time through the quotation form and we will confirm suitable products and sample availability.