What it adds to mortar
SBR latex is a polymer emulsion. In cement mortar it improves bond to the substrate, adds flexibility and reduces water absorption. TAC Latex SBR 4 is used this way.
Prepare the surface first
Remove loose material, clean off dust and oil, and dampen the surface without leaving standing water. Most bond failures start with a poor surface.
Mix by the data sheet
Use the latex-to-water-to-cement ratios in the product data sheet, mixing latex and water first and then adding to the dry mix.
Common mistakes
Over-wetting the mix, skipping the bonding slurry on old concrete, letting the slurry dry before applying the repair mortar, and curing too fast in hot weather.
Know its limits
SBR mortar improves performance but is not a full waterproofing system. For tanks and basements, add proper waterproofing, for example TAC 07.