Two products, one job
Both SBR latex and acrylic bonding agents are polymer emulsions added to cement mortar or applied as a bonding coat to help new material stick to an existing surface. Builders and applicators in Pakistan often use the terms loosely, so check what a product actually is before you compare prices.
What SBR latex is
SBR latex is a styrene-butadiene polymer dispersion. It is commonly mixed into cement-sand mortar or slurry for plaster, floor screeds, tile fixing and concrete repairs to improve adhesion and reduce water absorption of the mortar. See our guide on SBR latex mortar mixing for practical notes.
What an acrylic bonding agent is
Acrylic bonding agents are based on acrylic polymer emulsions. They are used in a similar way as bonding coats and mortar additives. Performance depends on the specific formulation, so rely on the manufacturer's data sheet rather than the general polymer name.
How to choose
Start with the application: repair mortar, plaster, tile adhesive or bonding slurry. Check the manufacturer's data sheet for intended use, dilution and mixing ratio. Consider whether the area is wet or exposed to water or sun. Ask for a trial patch before a large job. The cheapest option is not always the lowest cost once rework is counted.
Surface preparation matters most
Neither product rescues a dusty, oily or loose surface. Remove laitance and loose material, clean the surface, and dampen it as the data sheet directs before applying the bonding coat or repair mortar.
Where to get advice
Tell us the substrate, thickness and exposure and we can point you to the right product and the data sheet. We supply TAC Latex SBR 4 from Karachi with delivery across Pakistan.