SBR latex for plaster, tile fixing and concrete repairs

Published 2026-11-02 · SHAH Trading, Karachi

What SBR latex is

Styrene butadiene rubber latex is a polymer emulsion mixed into cement mortar or bonding slurry.

Why use it

It improves bond to old concrete, adds flexibility and reduces water absorption, which helps repairs last.

Typical uses

Bonding coats before repair mortar, plastering on difficult surfaces, and tile adhesive mortars.

Tips

Prepare the substrate: clean, sound and damp but not wet. Follow the mix ratio on the product data sheet.

Mixing and application notes

Mix the latex with water first, then add it to the cement-sand mix, and avoid over-wetting the mortar. Place repair mortar while the bonding slurry is still tacky. Our guide to SBR latex mortar mixing and common mistakes covers the details.

Which product

TAC Latex SBR 4 is the SBR latex in our catalog. For tanks and basements, pair good concrete with TAC 07 and a hydrophilic waterstop at joints.

Curing

Polymer-modified mortar still needs protection from fast drying. Keep it damp or covered, especially in hot and windy weather.

Frequently asked questions

Does SBR latex replace waterproofing?

It reduces water absorption in mortar but is not a complete waterproofing system.

Products mentioned

TAC Latex SBR 4 TAC 07 Waterproofing Admixture

Request a quotation

More: all guides · industrial chemicals supplier in Pakistan

Related guides